BLADE 200S

                                          Blade 200S - Overview



INTRODUCTION

Blade 200S
This particular heli  has been upgraded and modified from its previous version the Blade 200 SRX.  A few modifications and tweaks were made to the r/c helicopter and it does include Safe Technology.
The 200S is a fixed pitch helicopter, not a collective pitch heli, will fly much like a drone, designed for outdoor or large indoor facility flight.
The Blade 200S  is a good step up for pilots who may have flown quads or small  indoor heli's,
very docile on altitude changes, self leveling, has angle limits, pilots don't have to worry about getting out of control or flipping the heli over.
It is very easy to learn collective management, this helicopter is great for performing basic aerobatics, and maneuvers, a great model to grow and advance with.


KEY FEATURES

Blade 200 S Radio Controlled Helicopter

Safe Technology
SAFE ( Sensor Assisted Flight Envelope) is designed to utilize multiple axis sensors, along with software, that allows the heli to know its position relative to the horizon.
This awareness is used to create a controlled flight envelope the heli can use to maintain a safe amount of bank and pitch (angle) for safe flight.
These protection features on the Blade 200 S allows for multiple modes for the pilot to choose from to enhance skills with a greater sense of security and flight control.
Benefits
SAFE provides protection you can enable with a flip of a switch on the transmitter, multiple flight modes allow pilots of the Blade 200S to adapt the SAFE technology to their skill level instantly.
Every model with SAFE installed is optimized and ready for use.

Flight Modes / Rate Selection
Pilots can change rates on the transmitter by moving the two position dual rate switch.
Low Rate - beginners should use the low rate for initial flight, the rate reduces the control rates.
High Rate - allows pilot to have full control, should only be used by intermediate to advanced pilots.
Stability Mode - in this mode bank angle is limited to 40 degrees, when the cylic stick is released the heli returns to level flight.
Intermediate Mode - in this mode bank angle is limited to 60 degrees, when the angle stick is released the heli returns to level flight.
Agility Mode - No limitation to bank angle, when cylic stick is released heli returns to level flight. Great for Aerobatics !
video


Throttle Hold 
Used to prevent motor from powering up accidentally, turn the throttle hold on anytime for safety purposes like checking the direction of the controls.
Throttle hold can also be used to shut the motor down instantly if you lose control of the helicopter, in danger of crashing or both, just remember the blades will continue to spin briefly after initiating the command.
You will still have directional control if throttle control is activated.
Panic Recovery
If for any reason you lose control of the helicopter in any mode, simply push and hold the panic switch and move controls to a neutral position. SAFE technology goes to work to return the Blade 200S to upright and level position, if model is high enough off ground with no obstacles in its path.
Simply release the switch to turn off Panic Recovery and return to current flight mode.

IN CLOSING
The upgrades on the Blade 200S will definitely benefit beginners looking for a Heli that they can grow on and enhance their flying skills, while advancing thru the flight modes without having to purchase several r/c helicopters.
For more information on the model visit our website airarmorrc.com

PROTEK RC

                                                  Protek RC - Overview


INTRODUCTION

Protek the Company
After you have been in the RC hobby for a while, you begin to search for good high quality parts and accessories to maybe replace or upgrade on your model or models.
It's nice to know that companies like Protek are around to serve the RC community with quality products and support.
Protek actually got its start believe it or not in a garage by a man determined to provide RC enthusiasts with dependable products at a reasonable price.
After a lot of hard work and determination, Protek RC has not only become a source for o-rings and bearings, because there lineup runs much deeper than that, including batteries, battery chargers, and servos to name just a few.
Along with accessories Protek also handles tools to install the accessories, how about track
accessories ? Yes, they have them, from hauler bags and pit gear, to nitro accessories.
Well maybe your an airborne RC enthusiast, Protek RC carries a large variety of electric and gas airplane props.
Protek products are developed by an innovative group of RC enthusiasts, with a passion for the hobby.
Like any successful RC accessory company they back it all up with knowledgeable customer support team.
They can be contacted from 7 a.m. to 6 p.m. Mon.-Fri. at
1-800-705-2215 (Toll Free)


PRODUCTS AND ACCESSORIES

Protek RC 14.8v  4 Cell 5000mAh 100C LiPo Battery Pack

Batteries - the roar approved batteries range from 35C to 100C rates to adapt to any application.
Surface Packs - have very high discharge rates with the capacity for applications from smaller packs to high voltage packs for 1/5 scale models.
Protek RC offers supreme power packs that pack a punch and deliver good runtime for any model including 1S pan and 1/8 scale vehicles.
The sport race 3S pack from Protek RC provides plenty of power to get all the speed out of your Traxxas VXL equipped model.
Protek also carries NiMH, LiFe, and LiPo receiver packs for nitro models and LiFe and LiPo transmitter packs for your controller.
Last but not least a 4S pack is available to deliver power to your starter box, along with a handful of nickel packs for the younger crowd.
Flight Packs - ProTek provides flight packs with exceptional discharge rates, along with the capacity for a variety of aircraft applications.
1S and 2S micro LiPo packs for aircraft range from 25C to 35C, along with 2S, 3S, and 6S LiPo packs ranging from 20C to 70C.
A large selection from ProTek RC are designed to keep your aircraft airborne longer.

Chargers 

Protek RC Prodigy 680 Balance Charger

USB Charger - you'll have the ability to charge all your accessories in the field or at the track with a 2S - 4S LiPo battery.
Prodigy Touch - 680 features an easy to use touchscreen with all the amenities of a pro-level charger.
Prodigy 612 Duo - is a 10amp dual port battery charger, capable of delivering 200 watts of power per channel, you can charge 2 packs up to 6S at the same time.

Protek Brushless High Voltage 1705 BL Servo

Servos -Protek RC servos are durable, reliable, and affordable, from high voltage competition servos down to upgrades on cheaper servos found on most RTR models.
Protek 100, 200, and 300 series servos have good power over the competition, they are consistent, reliable, strong, with fast transit speeds, and precise centering.
Protek labels their servos after the number with a T or S, the T series servos are suited for applications that require more torque than speed, S series servos have less torque, with faster transit speeds.

Car Servos 
170S and 170T Team Edition - these servos are designed to provide, quick high speed response with the torque competitive drivers demand, these high quality servos are extremely reliable.
150S and 150T servos - have an aluminum case, with metal gears, for increased durability,
With 6.0V the 150S is a perfect fit for 1/10 scale electric models, because of its quick transit speed.
with 7.4v the 150S is a good fit for nitro touring models. The 150T is a good choice for monster trucks and crawlers. with 7.4v it is a good application for nitro powered monster trucks, and any 1/8 scale nitro vehicle.
130S and 130T servos - when you need precision control the heavy-duty metal gears along with high voltage circuitry that won't cost you an arm and a leg.
The 130S is a good choice for lighter 1/10 electric cars, with 6.0v.  If you increase the volts to 7.4 the 130S becomes a good steering and throttle servo in 1/10 scale nitro touring model, or any setup that requires quick response with 150oz in of torque.
Heavier 1/10 scale cars are a good fit for the 130T with 6.0v, but at 7.4v it becomes a good fit for 1/8 scale on-road nitro and 1/8 scale buggies.
100T / 100S servos - perfect upgrade for cheaper servos found on a fair amount of RTR cars.
The 100S is good for smaller lightweight models that require fast transit speeds, the 100T is a good pick for 1/10 scale and heavier models that require additional torque.

Heli Servos
Designed for Heli enthusiasts, the 270 TBL/SBL - the 230 series is priced competitively, with all around good performance.
The 230T  high voltage servo and the 230S tail servo have durable metal gears and 1520/333 Hz frequency with quality electronics, make them a good choice for models using standard size servos.
In closing -
The Protek 250 series servos were designed for high performance, these servos are identical to the 230 series on the inside, with same gears, electronics, and performance.
The difference is in the all-aluminum case, that is durable and dissipates heat really well.

Tool / Gear Hauler

Protek RC Tool and Gear Hauler

In order to transport gear and keep it organized, safe, and secure, Protek RC offers their unique hauler.
The hauler features numerous storage drawers, along with velcro and zipper sealed pockets to protect your items from the elements.
It is easy to roll around with its trolley wheels and retractable handle, and also includes a carrying strap.
To add a nice touch to the look Protek finishes off the appearance with Protek RC Logos.




ACCESSORIES
Nitro Accessories - Protek RC offers nitro users several key components to assist them in the operation of their model,  including glow ignitors, fuel bottles, starter kits with tools, air filters, and off road clutch components for 1/8 scale vehicles.
Bearings / Hardware - if you need to replace bearings Protek carries a variety of affordable steel bearings for multiple applications. If you are set on only the best Protek RC offers high quality, lightweight, ceramic bearings.
If your in need of hardware Protek offers metric grade, high strength screws, nuts and washers.
Connectors and Wire - When it comes to connectors and wire Protek delivers with battery pack adapters, extensions and charge leads.
When it comes to customizing your own wiring their line of pigtails, connectors, heat shrink, and balance accessories are hard to beat.
Tools - Protek RC carries the tools that can not only get the job done, but get the job done right.
Their high quality affordable line of tools include hex wrenches, in standard or metric sizes.
Specialty tools include wheel wrench, shoe tool, multi wrench, spring remover, and flywheel puller to make working on your model an enjoyable experience.
The tools are available in single, complete, or combination of the two.

FINAL THOUGHTS
It is always comforting to know that there are good quality, affordable choices out there when it comes to upgrading or repairing your RC models.
Protek RC carries a nice lineup of readily available accessories that are there if and when you need them.

To view many of the models that support their products visit our website airarmorrc.com

GPM RACING

                                            GPM Racing Products - Review


INTRODUCTION

The Company
GPM Racing Products
If you take your RC Racing seriously you may want to consider GPM Products for aluminum parts upgrades on your RC models.
GPM PARTS.COM consists of a group of professional individuals that possess a passion for radio control, and the models the hobby represents.
They are an individual authorized dealer of the GPM Racing Team, striving,focusing, and ensuring their customers are receiving high quality upgrades and products at an affordable price.
GPM specializes in aluminum and alloy parts for name brand RC models including Arrma, Associated, Axial, Team Losi, and Traxxas to name a few.
They offer an enormous selection of  sophisticated RC parts for the serious RC racing enthusiasts involved in the hobby.
From A-Arms to Body Mounts and everything in between, rest assured the Team at GPM Racing is there to meet any or all of your needs.

PRODUCTS

A-Arms 

Aluminum Lower A-Arms on Axial Yeti

The aluminum A-Arms from GPM Racing come in a variety of colors.
The bright colors really stand out and give your model an impressive appearance.
Included in the package are the (2) A-Arms
they come in pairs whether they are for the front or rear of the model.
(4) Stainless Steel Button Head Screws
(2) Stainless Steel Pins
The A-Arms are made of high quality 6061 T6
Aluminum.


Knuckle Arm Assembly

Alloy Knuckle Arm Assembly on Traxxas E-Maxx

The Aluminum Knuckle Arm Assembly comes in a variety of colors depending on your model.
The knuckle arms are a precise fit, with virtually
no tolerance.
The knuckle arms can improve steering performance.
1 pair per set.
Package Includes:
(2) 6 x13 x 5 bearings
(4) 10 x 1.5 o-rings
(4) Hex Dust Caps
(4) Dust proof Caps
(4) Delrin Screws

GPM Shocks

GPM Adjustable Shocks on Traxxas XO-1

The adjustable spring damper shocks are of the highest quality, and look great to.
They come in Red and Blue colors with a GPM logo on them, and individually packaged which is nice.
The shocks come pre-filled with fluid inside them.
Package includes:
(2) Aluminum Collars 3 x 6 x 3
(2) Aluminum Collars 3 x 5 x 5
(2) Aluminum Collars 3 x 7 x 17.5
(2) 3mm threaded locknuts
(2) Stainless Steel button head screws 3 x 18
(2) Countersink screws   3 x 35

video


FINAL THOUGHTS
This is just a small sample of the readily available parts from GPM Racing, if your looking for aluminum upgrades they certainly have an impressive inventory of high quality products.
For more information on the models they support visit our website airarmorrc.com

AXIAL YETI

                                                 Axial Yeti - Overview


INTRODUCTION

Axial 
The Company
Axial is based in Mission Viejo, California, and is know for its lineup of quality, high performance Rock Crawling and Rock Racing RC Vehicles.
Axial designs are engineered with the stamina to withstand extreme off-road bashing, with the capability of maintaining a high level of rock racing ability.
The skillfully engineered off-road RC vehicles and the technical elements implemented into the design were inspired by their full size desert counterparts.
At Axial they not only strive to design their RC vehicles with a true scale appearance, but include the functionality to match.
The models come in 1/8 scale, 1/10 scale, and 1/18 scale depending on the model. Models can be purchased in Kit or RTR (Ready to Run) versions depending on the model.
The RC models feature electric motors, some with brushed and some with brushless motors depending on the model.
Whether your a beginner, or an experienced hobby veteran, Axial has a variety of choices for you to choose from, to enjoy in any environment.

KEY FEATURES

Axial Yeti

Axial Yeti RC Truck

Racing Wheels - the beadlock Walker Evans Racing Wheels mounted on the Axial Yeti are officially licensed and will work with most 2.2" tires.
The IFD (Interchangeable Face Design) is easily dressed up for a new look.
With this wheel design you can vary the amount of air passing through the breather holes by leaving one, two, or three open holes, (2, 4, or 6 total) by simply rotating the inner (beadlock) ring.
When reassembled it locks the position with its 3 piece bead lock design.
BF Goodrich Krawler Tires - the Axial Yeti version of the tire mirrors the same aggressive look as the full size off-road B.F. Goodrich Krawler (T/A KX tires) which by the way has won more championships than any other tires combined.
Provide good performance on the open road and over the rocks, can be a bit more challenging when encountering soft fluffy soil.
With its high diversity and performance the tire is perfect for this style of model.
Brushless Power (Water Resistant) - powering the monster truck is a Vanguard 3150 KV 4 pole brushless motor, capable of delivering the precise amount of speed and torque for this rock hurling monster.
The long can design delivers an extreme amount of power when powered with a 3s LiPo.
The durable motor features 14 awg wire leads and 4mm male connectors.
The motor performs well and may surprise you with its strength and speed, on 3s the Axial Yeti has some serious power.
ESC - the vanguard ESC was developed by castle creations for Axial, provides exceptional power, braking, with adjustability. The ESC can be programmed manually with a castle field programming card or through castle link. Comes with standard Deans plug.

Suspension and Drivetrain
Independent Front Suspension - the IFS system provides you with the stability required for rock racing.
With various terrains, the rock sizes you encounter vary, and each one is handled individually, making the terrain varied from one side of the vehicle to the other.
The IFS system is designed to allow drivers to maintain control and stay on the intended path of travel, especially at high speeds as one side is adjusting to overcome the obstacles in its path.
video


Rear Axle - also featured on the Axial Yeti is an AR60 rear axle with a unique new 4 link rear suspension, the chassis on the yeti provides 3 upper link positions for adjustment.
The axle is constructed from a durable composite material, with a low flex rate. The axle tubes have been reinforced with a boxed in axle truss.
To change the roll center the lower link mounts can be flipped, designed to improve performance.
Tension Bar-another unique feature is the tension bar design, which has long pivot arms used in combination with the long travel suspension, designed to control torque twist resulting from extreme power.
The system reduces body roll and adds stability at high speeds.
Aluminum Shock Bodies - usually featured as an option from axial, but on the Axial Yeti, the aluminum shock bodies come standard.
The shocks provide for extremely smooth suspension movement throughout the entire range of wheel travel.
These aluminum shock bodies are precisely machined for superior handling on a variety of terrains.
Dual Slipper Clutch - the slipper clutch design on the model has a pad on each side of the spur gear which adds surface area for increased holding power and precise tuning.
Being the Yeti is a high torque application a durable 32 pitch gear has been utilized.
Metal Gear Servo - the tactic TSX metal gear servo cranks out 151 oz. in. of torque, for exceptional turning power. The dual ball bearings are responsible for smooth and precise rotation for the metal gear driven servo.

PRO'S
Brushless Motor - plenty of power and torque
Durable/ Versatile - can take some serious punishment
Good Handling Characteristics- good acceleration &  stopping power
Sealed Electronics - for wet environments
Easy access - to chassis and batteries
Readily available parts and upgrades
Scale appearance

CON'S
A bit nose heavy in the jumps

FINAL THOUGHTS
The Axial Yeti is a versatile off-road beast, that is capable of overcoming some serious challenges. Is it without its flaws ? Certainly not, but overall its a worthwhile investment that can be easily upgraded and tweaked to your liking.
For more information on the model visit our website airarmorrc.com

PROLINE RC TIRES

                                               Proline RC Tires - Overview

 Monster Truck with Pro-Line Badlands Tires and Impulse Pro-Loc Wheels

INTRODUCTION

The Company
Pro Line Racing - The company began is quest in the RC industry back in 1982.
The company entered the RC market by producing a line of Proline RC Tires and wheels for the growing off-road RC industry.
Their primary focus was on the advancement of off-road tires and wheels, it certainly paid off, and awarded the company 12 IFMAR world championships, and numerous U.S. and European championships, along with a multitude of regional events.
Back in 1995, Pro-line made a decision to join forces with PROTOform Race Bodies which turned out to be a winning move that led to the expansion of the companies body range, with a competitive focus on the on-road RC market.
With a committed team of innovators, producing quality products, Pro Line Racing has invested and developed a world class facility and team of U.S. employees.
The goal at pro-line has always been to satisfy RC enthusiasts with cutting edge, high performance products, with the highest service, designed to improve your RC experience.
Through the years RC consumers have come to know Pro-Line Racing as a company committed to superior product development with proven RC performance.
Pro-Line Racing values the friendships that have developed between distributors, suppliers, partners,  customers, and pro-line team members.
Pro-line is committed to supplying high quality products for their customers, they are available for Tech support from 10:00 a.m. to 3:00 p.m. PST,  Monday - Friday to answer any questions or address any issues you may encounter via
phone  1-800-899-7223. or email customerservice@prolineracing.com


PRODUCTS

Proline RC Tires

Proline Badland Tires mounted on Impulse Pro-Lock Wheels

Pro-Line offers a wide array of premium quality tires for different terrains and environments.
They provide short course and desert truck tires for all terrains, racing, sand and street applications.
Tires are available for
1:8 scale Buggy, Truck, and Monster Trucks,
1:10 scale Buggy, Monster Truck, Stadium Truck
Rock Crawlers
1:5 scale Buggy and Truck
Mini, Micro, and other
Proline RC Tires can also be purchased pre-mounted on wheels of your choice.
The extensive selection provides enhanced performance opportunities for RC enthusiasts whether your running off-road, on the track, or on the street.
Having problems with your stock tires ballooning ?
The tires are molded from high strength rubber to eliminate the issue found on most stock tires on the market today.
Note: Pro-line also offers foam inserts ( Closed Cell)

Proline RC Wheels

The Wheel selection from Pro-line is quite extensive as well, a few years back Pro-line introduced their innovative bead-loc wheels which have become a popular and well received addition by the RC community.

Pro-Line Titus 2.2  Bead-Loc 3 piece wheel

The wheel sets from Pro-Line are molded from DuPont Nylon material, the unique part of the bead-loc setups is the aluminum bead-loc rings, which not only holds it all together for a good seal, but a realistic look.

Proline RC Tires and Wheels can be purchased separately or pre-mounted. 

The wheels are made for a variety of different models, scales, and classes of RC vehicles.

The team at Pro-Line does not compromise on materials or workmanship in the manufacturing process and strives to deliver a high quality product for their customers, giving you a competitive advantage.

Beyond tires and wheels, the company offers a variety of rc vehicle bodies, performance parts, and accessories.

Whether your into bashing, racing at your local track, or adventuring off on your own, the team at pro-line has a product for you.
video



IN CONCLUSION
Many Brand name RC model owners are always looking for ways to improve the performance of their RC vehicles.
It is companies like Pro-Line that have accepted the challenge and stepped up to deliver high quality upgrades for modelers and hobby enthusiasts.
For more information on brand name RC vehicles visit our website airarmorrc.com

T BONE RACING

                                             T Bone Racing - Overview

                                           Specializing in RC Protection

T Bone Racing Logo and Packaging

INTRODUCTION

The Company 
T-Bone Racing - was founded in 2004 by Rich Grafton, an avid RC car enthusiast who enjoyed racing RC cars with friends and family on there yard track.
It occurred to Rich that more time was spent replacing broken parts than time spent racing the models.
There had to be a better way to protect the models, he decided to make a bumper.
Rich's background in welding and fabrication was an asset in developing a bumper for a Losi RC model.
After running the model for a period of time and testing, the front end failures of the past were history.
He built another bumper for one of his other models, eventually he had fabricated and outfitted his entire fleet with bumpers.
The next idea that popped into his head was to sell one of his bumpers on e-bay, before long he realized the demand for bumpers and the protection they provided was a void that the RC hobby needed filled.
He went on to build several bumpers for different models and that is how the company T-Bone Racing came to be.
The goal at T-Bone Racing is to provide the best protection products for RC enthusiasts around the world.
T-Bone Racing manufacturers aftermarket products including bumpers, wheelie bars, and skids.
Their quality products are cut out with waterjet machines and finished by hand, designed to increase your run time and reduce failures.
They are available to answer any questions you may have and can be reached at tboneracing.net
or by phone at 208-635-5483

PRODUCTS
T Bone Racing manufactures aftermarket bumpers, skid plates, wheelie bars, and some specialty items like skis for popular RC models like Arrma, Axial Racing, Losi, and Traxxas to name a few.

RC Bumpers 

T Bone Racing Front Bumper for  Traxxas X Maxx installed

The aftermarket bumpers are designed to precisely fit your particular model.
In some cases depending on the model size, several pieces are manufactured to complete the piece or unit.
The  bumpers from T Bone are also available in a variety of colors, depending on the particular model. This particular bumper is available in black, red, or blue.The picture shown is a front bumper installed on the Traxxas X Maxx.
The package includes 4 pieces:
1- Front Bumper
1- Front Bumper Support
1- Front Bumper Stiffner
1- Basher Bar
The bumper for the Traxxas X Maxx is the largest one manufactured to date from the company.

Skid Plates

Arrma Nero Chassis and A-Arm Skid installed

A variety of  aftermarket skids are available from T Bone Racing, including chassis skids, A-Arm skids, shock skids, differential skids, and mud guards.
The skid plates are designed to precisely fit your particular model, all the parts including spacers are included to complete the assembly.
The Picture shown has the chassis skid and 1 A-Arm skid installed on the Arrma NERO RC model.
Installation is easy to complete in a minimal amount of time.
This chassis skid includes 2 pieces
1 - chassis skid
1 - Delrin Bar  Note: Includes Lifetime Warranty
The A Arm skid package is made for both front and rear A-Arms, either includes:
1- Left and Right Skid
2- Skid backers (Left and Right)
2 -Spacers    Note: Includes lifetime Warranty

Wheelie Bars

T Bone Racing Wheelie Bar installed on Traxxas X Maxx

T Bone Racing manufactures their Wheelie Bars to precisely fit your particular model.
The picture shown features the wheelie bar installed on the Traxxas X Maxx.
To minimize the chance of a screw pulling through, 2 stems are included to take up the slack from the raised ribs on the stock skid.
To minimize flex, a new rear brace now includes 2 mounting holes instead of one.
The whole assembly sits lower in the rear, which drops front wheels down to a lower angle on wheelies.

The package includes : 1 -Rear bumper support, 2 -Shims, 1 -Custom Bolt on Rear, 1 -Rear Brace,
and 1 -Wheelie Bar.

video


FINAL THOUGHTS
Recently the company released an EXO Cage for the Arrma Kraton, the team at T-Bone continues to add products for many name brand RC models.
The demand for high quality protection parts continues, and T Bone Racing will certainly play its role in meeting the demand.
For more information on the upgradeable models on the market visit our website airarmorrc.com

1 16 E REVO VXL

                             1 16 E Revo VXL - Overview

INTRODUCTION

By Traxxas
The renowned Traxxas brand has been around for awhile, for over 30 years their innovative designs have become the choice for many RC enthusiasts.
Their lineup of RC Vehicles include RC boats, cars, quadcopters, and trucks.
They have over 50 models to choose from, including electric and nitro powered models, in various scales, styles, and colors.
Traxxas models include some of the most advanced features on the market today, including TSM (Traxxas Stability Management), and the advanced TQi Radio system with optional features supported by the Traxxas Link App.
Traxxas models, parts, and accessories, are readily available, and backed by a friendly, knowledgeable, customer support team, available to answer your questions or deal with any problems you may encounter.
They are available Mon.-Fri. 8:30 a.m.to 9:00 p.m. Central Standard Time.
In U.S. 1-888-872-9927      Outside U.S. 972-549-3000

KEY FEATURES
1 16 E Revo VXL

1 16 E Revo VXL RC Car by Traxxas

Suspension - the Revo-Spec suspension was engineered and designed with performance that is relatively light over small bumps, and tends to tighten when compressed to prevent the model from bottoming out when landing off larger jumps.
Suspension Travel -
Pivot balls on the suspension are utilized for easy adjustment and smooth suspension movement.
Sealed ball bearings shield against dirt and debris and reduce friction.
GTR Shocks - are oil filled and adjustable, designed to absorb the punishment, and keep the 1 16 E Revo VXL under control. 
Note: the viscosity of the oil may need to be relatively heavy to get good handling on track or when jumping the model.
The tuneable shocks have threaded spring pre-load collars for adjusting ride height, also included on the shocks are air bladders, that are designed for air/oil separation.
Damping rates are tuneable, and independent of ride height adjustments, they are designed to assist with handling and control.
Brushless Motor and ESC - the 8 turn 4000 kv  brushless Vileneon motor is designed to be maintenance free.
The rotor is balanced precisely, inside the case high temperature neodymium motor magnets have been included in the design, power is transferred through 3.5mm bullet connectors.
The Vileneon VXL 3m brushless Electric Speed Control is compatible with
LiPo battery packs, either 2 or 3 cell, ranging from ( 7.4 to 11.1 volts) ( Recommended battery type)
NiMH or NiCad battery packs from 6 -12 cells ranging from (7.2 to 14.4 volts)
Separate battery compartments are conveniently located on each side of the chassis, and include quick release battery doors and battery cooling vents.
30+mph out of the box with included NiMH battery.
50+mph with additional NiMH pack or LiPo battery setups.
The Vileneon ESC includes a heat sink, and a 2 stage  low voltage detection for LiPo batteries, an integrated on/off switch, and EZ set, 1 button setup.
                           3 Driver Modes - are available on the E Revo VXL model

1 16 E Revo VXL RC  Chassis

Training Mode - Great for beginners (Cut power up to 50%) Forward and Reverse. Brake 100%
Sport Mode - Forward / Brake / Reverse
Race Mode -  Forward / Brake /
Transmission - the transmission was built to handle brushless power, with ball bearings throughout.
The slipper clutch is adjustable and allows you to set power transfer to suit your style and terrain.
Sealed Differentials - the diffs are heavy duty steel, and filled with a high-quality silicone fluid which prevents unloading while maintaining maximum control and handling. Note: Recommend you shim the diffs.
Universal Driveshafts - the fully equipped model includes telescoping universal driveshafts for efficient and maximum power transfer to the wheels.
The oversized driveshafts were designed with durability and strength to handle the Vileneon brushless power.
Sealed Electronics - the electronics onboard the 1 16 E Revo VXL are sealed from the elements, the components themselves are not waterproof but the cases they reside in are sealed.
The patented receiver box from Traxxas is designed to allow the servo and antenna wires to be neatly routed through a watertight seal.
O- rings protect the receiver from dust and water, the receiver is capable of being removed or upgraded without losing the integrity of the seal to the box.
The digital steering servo box is watertight and sealed with its o-ring seal type construction.
The  E Revo 's 2080 servo puts out 41.7 oz.-in. of torque.
video

Body and Components - the 1 16 E Revo VXL comes pre-assembled with a ProGraphix body and pre-applied decals, so you can be up and running within minutes out of the box.
A wing for downforce adds a formula 1 type style, the wings downforce is designed to assist with rear traction, while controlling the model in the air when jumping.

PRO'S
Brushless Power and ESC  (reduced maintenance)
Good Speed and Power  (LiPo batteries recommended)
Durable - can withstand some punishment
Sealed Electronics
Readily available parts and upgrades

CON'S
Can be hard to handle due to its size and speed  ( especially for a beginner) Tends to want to roll over while cornering.

FINAL THOUGHTS
With the proper gearing and battery setup the 1 16 E Revo VXL is extremely fast, almost to fast. Most users recommend LiPo batteries. May be a good idea to put a wheelie bar on it to keep it from flipping over backwards when pulling off wheelies. The model is durable and can withstand some serious bashing. It may take some time to get a handle on this one, but overall it is a good performer.
For more information on the model visit our website airarmorrc.com