INTRODUCTION
Protek the Company
After you have been in the RC hobby for a while, you begin to search for good high quality parts and accessories to maybe replace or upgrade on your model or models.
It's nice to know that companies like Protek are around to serve the RC community with quality products and support.
Protek actually got its start believe it or not in a garage by a man determined to provide RC enthusiasts with dependable products at a reasonable price.
After a lot of hard work and determination, Protek RC has not only become a source for o-rings and bearings, because there lineup runs much deeper than that, including batteries, battery chargers, and servos to name just a few.
Along with accessories Protek also handles tools to install the accessories, how about track
accessories ? Yes, they have them, from hauler bags and pit gear, to nitro accessories.
Well maybe your an airborne RC enthusiast, Protek RC carries a large variety of electric and gas airplane props.
Protek products are developed by an innovative group of RC enthusiasts, with a passion for the hobby.
Like any successful RC accessory company they back it all up with knowledgeable customer support team.
They can be contacted from 7 a.m. to 6 p.m. Mon.-Fri. at
1-800-705-2215 (Toll Free)
PRODUCTS AND ACCESSORIES
 |
| Protek RC 14.8v 4 Cell 5000mAh 100C LiPo Battery Pack |
Batteries - the roar approved batteries range from 35C to 100C rates to adapt to any application.
Surface Packs - have very high discharge rates with the capacity for applications from smaller packs to high voltage packs for 1/5 scale models.
Protek RC offers supreme power packs that pack a punch and deliver good runtime for any model including 1S pan and 1/8 scale vehicles.
The sport race 3S pack from Protek RC provides plenty of power to get all the speed out of your Traxxas VXL equipped model.
Protek also carries NiMH, LiFe, and LiPo receiver packs for nitro models and LiFe and LiPo transmitter packs for your controller.
Last but not least a 4S pack is available to deliver power to your starter box, along with a handful of nickel packs for the younger crowd.
Flight Packs - ProTek provides flight packs with exceptional discharge rates, along with the capacity for a variety of aircraft applications.
1S and 2S micro LiPo packs for aircraft range from 25C to 35C, along with 2S, 3S, and 6S LiPo packs ranging from 20C to 70C.
A large selection from ProTek RC are designed to keep your aircraft airborne longer.
Chargers
 |
| Protek RC Prodigy 680 Balance Charger |
Prodigy Touch - 680 features an easy to use touchscreen with all the amenities of a pro-level charger.
Prodigy 612 Duo - is a 10amp dual port battery charger, capable of delivering 200 watts of power per channel, you can charge 2 packs up to 6S at the same time.
 |
| Protek Brushless High Voltage 1705 BL Servo |
Protek 100, 200, and 300 series servos have good power over the competition, they are consistent, reliable, strong, with fast transit speeds, and precise centering.
Protek labels their servos after the number with a T or S, the T series servos are suited for applications that require more torque than speed, S series servos have less torque, with faster transit speeds.
Car Servos
170S and 170T Team Edition - these servos are designed to provide, quick high speed response with the torque competitive drivers demand, these high quality servos are extremely reliable.
150S and 150T servos - have an aluminum case, with metal gears, for increased durability,
With 6.0V the 150S is a perfect fit for 1/10 scale electric models, because of its quick transit speed.
with 7.4v the 150S is a good fit for nitro touring models. The 150T is a good choice for monster trucks and crawlers. with 7.4v it is a good application for nitro powered monster trucks, and any 1/8 scale nitro vehicle.
130S and 130T servos - when you need precision control the heavy-duty metal gears along with high voltage circuitry that won't cost you an arm and a leg.
The 130S is a good choice for lighter 1/10 electric cars, with 6.0v. If you increase the volts to 7.4 the 130S becomes a good steering and throttle servo in 1/10 scale nitro touring model, or any setup that requires quick response with 150oz in of torque.
Heavier 1/10 scale cars are a good fit for the 130T with 6.0v, but at 7.4v it becomes a good fit for 1/8 scale on-road nitro and 1/8 scale buggies.
100T / 100S servos - perfect upgrade for cheaper servos found on a fair amount of RTR cars.
The 100S is good for smaller lightweight models that require fast transit speeds, the 100T is a good pick for 1/10 scale and heavier models that require additional torque.
Heli Servos
Designed for Heli enthusiasts, the 270 TBL/SBL - the 230 series is priced competitively, with all around good performance.
The 230T high voltage servo and the 230S tail servo have durable metal gears and 1520/333 Hz frequency with quality electronics, make them a good choice for models using standard size servos.
In closing -
The Protek 250 series servos were designed for high performance, these servos are identical to the 230 series on the inside, with same gears, electronics, and performance.
The difference is in the all-aluminum case, that is durable and dissipates heat really well.
Tool / Gear Hauler
 |
| Protek RC Tool and Gear Hauler |
In order to transport gear and keep it organized, safe, and secure, Protek RC offers their unique hauler.
The hauler features numerous storage drawers, along with velcro and zipper sealed pockets to protect your items from the elements.
It is easy to roll around with its trolley wheels and retractable handle, and also includes a carrying strap.
To add a nice touch to the look Protek finishes off the appearance with Protek RC Logos.
ACCESSORIES
Nitro Accessories - Protek RC offers nitro users several key components to assist them in the operation of their model, including glow ignitors, fuel bottles, starter kits with tools, air filters, and off road clutch components for 1/8 scale vehicles.
Bearings / Hardware - if you need to replace bearings Protek carries a variety of affordable steel bearings for multiple applications. If you are set on only the best Protek RC offers high quality, lightweight, ceramic bearings.
If your in need of hardware Protek offers metric grade, high strength screws, nuts and washers.
Connectors and Wire - When it comes to connectors and wire Protek delivers with battery pack adapters, extensions and charge leads.
When it comes to customizing your own wiring their line of pigtails, connectors, heat shrink, and balance accessories are hard to beat.
Tools - Protek RC carries the tools that can not only get the job done, but get the job done right.
Their high quality affordable line of tools include hex wrenches, in standard or metric sizes.
Specialty tools include wheel wrench, shoe tool, multi wrench, spring remover, and flywheel puller to make working on your model an enjoyable experience.
The tools are available in single, complete, or combination of the two.
FINAL THOUGHTS
It is always comforting to know that there are good quality, affordable choices out there when it comes to upgrading or repairing your RC models.
Protek RC carries a nice lineup of readily available accessories that are there if and when you need them.
To view many of the models that support their products visit our website airarmorrc.com
No comments:
Post a Comment